Micro-Perf & Cut Multi-Tool

to fit 35mm exit shaft (Full Pack: Options 1-2)

Stock Code: MT-GUK

Shaft Size: 35mm exit shaft

Outer Diameter: 59.4

Micro-Perf & Cut Multi-Tool to fit 35mm exit shaft (Full Pack: Options 1-2) Pack Shot

£897.00 + P&P

Prices plus delivery and subject to VAT where appropriate.

Additional Information

Compatible on:
SM 50/2
SM 54/4
SM 74/4
FA 50
FA 54
FA 74
FA 30

Contents of Package

1x Male Blade Holder (MT-BH-GUK/35): used to hold perforating/slitting blade whilst material is fed through

1x Female Nylon Holder (MT-NSH-GUK/35): used to secure nylon perforating and kiss-cutting process

1x Black Nylon Sleeve (MT-NY/SL-GUK): used on light weight stocks (65-280gsm), to allow sufficient blade pressure onto material (for perforating and kiss-cutting only)

1x Blue Nylon Sleeve (MT-NY/SL-GUK-B): used on heavier stocks (250-280gsm unpwards), allowing sufficient blade pressure onto material

2x Cutting Bosses (CB-GUK): used to aid cutting, producing scissor effect as material is fed through device (for slitting only)

2x Cutting Knives (CK-GUK-01): (63.00mm Outer Diameter) used for trimming on normal stock

0x Kiss-Cutting Blade (CK-02) (optional): (59.65mm Outer Diameter) used for kiss-cutting applications

0x Long Cutting Knives (CK-03) (optional): (65mm Outer Diameter) used for trimming on heavy stock

2x Black Gripper Band (M15): used to feed and support material through device

1x Micro-Perforating Blade - 17 tpi (MPB-17 GUK): Micro-Perforating blade with a 17 teeth per inch profile. Used to perforate medium/heavy stocks. To be used in combination with both the Black Nylon Sleeve for stock weights 170-280gsm, and with the Blue Nylon Sleeve for stock wieghts 250-350gsm

1x Micro-Perforating Blade - 25 tpi (MPB-25 GUK): Micro-Perforating blade with a 25 teeth per inch profile. Used to perforate medium stocks. To be used in combination with the Black Nylon Sleeve for stock weights 100-170gsm

1x Micro-Perforating Blade - 52 tpi (MPB-52 GUK): Micro-Perforating blade with a 52 teeth per inch profile. Used to perforate light stocks. To be used in combination with the Balck Nylon Sleeve for stock weights 65-100gsm

2x Blue Gripper Band (M40): used to feed and support material through device during edge trimming only

2x Perforating Blade Seal (M10): used to hold perforating and cutting blades into position

1x Waste Stripper - 5mm width (TWS-ID/35-GUK-5) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Waste Stripper - 4mm width (TWS-ID/35-GUK-4) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Waste Stripper - 3mm width (TWS-ID/35-GUK-3) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Extraction Tool (Extraction Tool): used to change rubber grippers from Male Blade Holder