Micro-Perf & Cut Multi-Tool

Contents of Package

1x Male Blade Holder (MT-BH/HO-20): used to hold the perforating/slitting blade whilst material is fed through

1x Female Nylon Holder (MT-NSH/HO-20): used to secure nylon perforating and kiss-cutting process

1x Black Nylon Sleeve (PD-NY/SL-HO): used on light weight stocks (65-280gsm), to allow sufficient blade pressure onto material (for perforating and kiss-cutting only)

1x Blue Nylon Sleeve (PD-NY/SL-HO-B): used on heavier stocks (250-280gsm upwards), allowing sufficient blade pressure onto material

2x Cutting Bosses (CB-HO-01): used to aid cutting, producing scissor effect as material is fed through device (for slitting only)

2x Cutting Knives (CK-30-01): (52.85mm Outer Diameter) used for trimming on normal stock

0x Kiss-Cutting Blade (CK-30-02) (optional): (50.35mm Outer Diameter) used for kiss-cutting applications

1x Micro-Perforating Blade - 17 tpi (MPB-17/30mm): Micro-Perforating blade with a 17 teeth per inch profile. Used to perforate medium/heavy stocks. To be used in combination with both the Black Nylon Sleeve for stock weights 170-280gsm, and with the Blue Nylon Sleeve for stock weights 250-350gsm

1x Micro-Perforating Blade - 25 tpi (MPB-25/30): Micro-Perforating blade with a 25 teeth per inch profile. Used to perforate medium stocks. To be used in combination with the Black Nylon Sleeve for stock weights 100-170gsm

1x Micro-Perforating Blade - 52 tpi (MPB-52/30mm): Micro-Perforating blade with a 52 teeth per inch profile. Used to perforate light stocks. To be used in combination with the Black Nylon Sleeve for stock weights 65-100gsm

1x Micro-Perforating Blade - 12 tpi (MPB-12/30mm) (optional): Micro-Perforating blade with a 12 teeth per inch profile. Used to perforate heavy stocks. To be used in combination with the Blue Nylon Sleeve

1x Micro-Perforating Blade - 72 tpi (MPB-72/30mm) (optional): Micro-Perforating blade with a 72 teeth per inch profile. Used to perforate light stocks. To be used in combination with the Black Nylon Sleeve

2x Black Gripper Band (M-51): used to feed and support material through device

2x Blue Gripper Band (M-62): used to feed and support material through device during edge trimming only

2x Perforating Blade Seal (M-32): used to hold perforating and cutting blades in position

1x Waste Stripper - 5mm width (TWS-ID/HO-20-5) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Waste Stripper - 4mm width (TWS-ID/HO-20-4) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Waste Stripper - 3mm width (TWS-ID/HO-20-3) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Extraction Tool (Extraction Tool): used to change rubber grippers from Male Blade Holder