Micro-Perf & Cut Multi-Tool

to fit 20mm exit shaft (Full pack: Options 1-2)

Stock Code: MT-MB

Shaft Size: 20mm exit shaft

Outer Diameter: 40mm

Micro-Perf & Cut Multi-Tool to fit 20mm exit shaft (Full pack: Options 1-2) Pack Shot

For instant price quotes, or to learn about free demonstrations click here to find your local Tech-ni-Fold distributor.

Additional Information

Compatible on:
FA 35
FA 36
FA 43
FA 45

Contents of Package

1x Male Blade Holder (MT-BH/MB-20): used to hold the perforating/slitting blade whilst material is fed through

1x Female Nylon Holder (MT-NSH/MB-20): used to secure nylon perforating and kiss-cutting process

1x Black Nylon Sleeve (MT-NY/SL-MB-20): used on light weight stocks (65-280gsm), to allow sufficient blade pressure onto material

1x Blue Nylon Sleeve (MT-NY/SL-MB-20-B): used on heavier stocks (250-280gsm upwards), allowing sufficient blade presseure onto material (for perforating and kiss-cutting only)

2x Cutting Bosses (CB-MB-01): used to aid cutting, producing scissor effect as material is fed through device (for slitting only)

2x Cutting Knives (CK-MB-01): (43.50mm Outer Diameter) used for trimming on normal stock

1x Kiss-Cutting Blade (CK-MB-02) (optional): (40.35mm Outer Diameter, optional) used for kiss-cutting applications

1x Micro-Perforating Blade - 17 tpi (MPB-MB-17): Micro-Perforating blade with a 17 teeth per inch profile. Used to perforate medium/heavy stocks. To be used in combination with both the Black Nylon Sleeve for stock weights 170-280gsm, and with the Blue Nylon Sleeve for stock weights 250-350gsm

1x Micro-Perforating Blade 25 tpi (MPB-MB-25): Micro-Perforating blade with a 25 teeth per inch profile. Used to perforate medium stocks. To be used in combination with the Black Nylon Sleeve for stock weights 100-170gsm

1x Micro-Perforating Blade 52 tpi (MPB-MB-52): Micro-Perforating blade with a 52 teeth per inch profile. Used to perforate light stocks. To be used in combination with the Black Nylon Sleeve for stock weights 65-100gsm

2x Perforating Blade Seal (M-32): used to hold perforating and cutting blades into position

1x Waste Stripper - 5mm width (TWS-ID/GUK-20-5) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

2x Black Gripper (M-55): used to feed and support material through device

2x Blue Gripper (M-63): used to feed and support material through device during edge trimming only

1x Waste Stripper - 4mm width (TWS-ID/GUK-20-4) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Waste Stripper - 3mm width (TWS-ID/GUK-20-3) (optional): acts as waste deflector preventing waste material wrapping around machine shaft

1x Extraction Tool (Extraction Tool): used to change rubber grippers from Male Blade Holder